Elmomc AC Input Digital Servo Drives-Bassoon Manual de usuario descargar pdf (Pagina 35)

Bassoon Installation Guide Installation

MAN-BASIG (Ver. 1.502)

www.elmomc.com

3.5.6.1. Main Encoder Buffered Outputs or Emulated Encoder Outputs Option on

Feedback B (J2) (YA[4]=4)

Through FEEDBACK B the Bassoon can provide buffered main, or emulated, encoder signals to

another controller or drive. This option can be used when:

• The Bassoon is used as a current amplifier to provide position data to the position

controller.

• The Bassoon is used in velocity mode, to provide position data to the position controller.

• The Bassoon is used as a master in Follower or ECAM mode.

Below are the signals on the Auxiliary Feedback ports when set up to run as a buffered outputs

or emulated outputs of the main encoder (on FEEDBACK A):

Pin Signal Function Pin Positions

1 SUPRET Supply return

2 +5 V NA

3 INDEXO- Index complement output

4 INDEXO Index output

5 CHBO- Channel B complement output

6 CHBO Channel B output

7 CHAO- Channel A complement output

8 CHAO Channel A output

Table 7: Main Encoder Buffered Output or Emulated Encoder Output Pin Assignments on J2

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 68 69

Sin comentarios

Elmomc AC Input Digital Servo Drives-Bassoon Manual de usuario Pagina 35