Elmomc AC Input Digital Servo Drives-Bassoon Manual de usuario descargar pdf (Pagina 17)

Bassoon Installation Guide Installation

MAN-BASIG (Ver. 1.502)

www.elmomc.com

3.1.3. AC Power Requirements

Below are the Bassoon’s AC power requirements:

Component Single-Phase Supply Voltage

Circuit breaker current rating 200% to 300% of drive current

Circuit breaker voltage rating 230 VAC

Contactor Up to 200% of drive current

3.2. Unpacking the Drive Components

Before you begin working with the Bassoon system, verify that you have all of its components,

as follows:

• The Bassoon servo drive

• The Composer software and software manual

• The Bassoon cable kit (if ordered separately)

The Bassoon is shipped in a cardboard box with Styrofoam protection.

To unpack the Bassoon:

1. Carefully remove the servo drive from the box and the Styrofoam.

2. Check the drive to ensure that there is no visible damage to the instrument. If any damage

has occurred, report it immediately to the carrier that delivered your drive.

3. To ensure that the Bassoon you have unpacked is the appropriate type for your

requirements, locate the part number sticker on the side of the Bassoon. It looks like this:

The P/N number at the top gives the type designation as follows:

4. Verify that the Bassoon type is the one that you ordered.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 68 69

Sin comentarios

Elmomc AC Input Digital Servo Drives-Bassoon Manual de usuario Pagina 17