Elmomc AC Input Digital Servo Drives-Bassoon Manual de usuario descargar pdf (Pagina 25)

Bassoon Installation Guide Installation

MAN-BASIG (Ver. 1.502)

www.elmomc.com

3.5.3. Connecting the Auxiliary Power Cable (J4)

Connect the auxiliary power supply to the J4 port on the front of the Bassoon, using a

2-pin Molex plug. Remember, you are working with DC power; be sure to exercise caution. The

required voltage is 24 VDC.

Notes for 24 VDC auxiliary power supply connections:

• Use a 24 or 26 AWG twisted pair shielded cable.

• The 24 VDC auxiliary power supply must meet all safety requirements and must be

separated from hazardous live voltages using reinforced or double insulation in accordance

with approved safety standards.

• For safety reasons, connect the return (common) of the 24 VDC source to the closest

ground.

• Connect the cable shield to the closest ground near the 24 VDC source.

• Before applying power, first verify the polarity of the connection.

Pin Signal Function Pin Positions

1 +24VDC +24 VDC auxiliary power supply

2 RET24VDC Return (common) of the 24 VDC

auxiliary power supply

Table 3: Auxiliary Power Cable Plug

Figure 9: Auxiliary Power Supply (J4) Connection Diagram

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 68 69

Sin comentarios

Elmomc AC Input Digital Servo Drives-Bassoon Manual de usuario Pagina 25