Elmomc SimplIQ Command Reference Manual de usuario descargar pdf (Pagina 137)

RL - Record Length

Purpose:

Specifies the length of the recorded data, as follows:

Number of Simultaneously

Recorded Signals

Maximum

Record Length

1 4096

2 2048

3 1365

4 1024

Table 3-39: Record Length of Simultaneously Recorded Signals

RL can specify that the signal records will be shorter than the maximum. If RL is set to a

value higher than the maximum record length (for example, RC defines three recorded

signals, but RL=2048), the recorder will still work. The length of the records, however,

will be shorter than RL. The actual size of the recorded data is returned by WI[21].

Attributes: Type: Parameter, Integer

Source: Program, RS-232, CANopen

Restrictions: Recorder inactive (RR=0 or RR=-1)

Default value: 256 (RS), Volatile

Range: [1…4096]

Unit modes: All

Activation: Next initiation of the recorder (RR).

If the drive has stored a previously recorded data vector, setting RL will invalidate

this data. Invalidated data cannot be retrieved.

Sin comentarios

Elmomc SimplIQ Command Reference Manual de usuario Pagina 137