Elmomc SimplIQ Analog Servo Amplifiers-Piccolo Installati Manual de usuario descargar pdf (Pagina 27)

Piccolo Installation Guide Servo Control Operation

MAN-PICIG (Ver. 2.301)

www.elmomc.com

4.9. Status Indications

The following table lists the Piccolo amplifier status indications.

Function Latch

Option

AOK SO1 SO2 SO3

1 Amplifier OK

(AOK)

N/A Low Open collector Open collector Open collector

2 External disable No Low Low Open collector Low

3 Current limit No Low Open collector Open collector Low

4 Short Yes Open collector Low Open collector Low

5 Over

temperature

Yes Open collector Open collector Low Low

6 Internal supplies

protection

No Open collector Low Low Open collector

7 Under voltage No Open collector Low Open collector Open collector

8 Over voltage No Open collector Open collector Low Open collector

9 Shunt* No Low Open collector Low Open collector

10 Power up reset No Open collector Open collector Open collector Open collector

11 Commutation

failure

Yes Open collector Low Low Low

* This indication can be used as a digital input for activating an external shunt regulator.

Table 9: Piccolo Status Indications

Notes:

• Without latch mode:

The status indications are reset when the fault disappears.

• With latch mode:

The Short, Over Temperature and Commutation Failure status indications are reset when

the enable signal is temporarily removed from the enable input.

• Multiple faults:

Only the reading of the first fault is reliable. Additional faults add on to the status outputs

and the indication is therefore meaningless.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Elmomc SimplIQ Analog Servo Amplifiers-Piccolo Installati Manual de usuario Pagina 27