Elmomc Multi-Axis Motion Controller-Maestro Installation Manual de usuario descargar pdf (Pagina 31)

Maestro Installation Guide Maestro Software Setup

MAN-MASIG (Ver 1.33)

4.4.1 Peer-to-Peer Connection

When connecting a Maestro directly to a PC, select Start/Settings/Control Panel to open the

Control Panel and then select Network and Dial-up Connections/Local Area

Connection/Properties to set the IP address of the Maestro manually.

In the Internet Protocol Properties menu select the Use the following IP address option and

enter 10.0.0.2 for the IP address and 255.0.0.0 for the Subnet mask.

Select OK in the Internet Protocol Properties dialog, and OK in the Local Area Connection

Properties box.

Maestro's delivered from the factory have an IP Address of 10.0.0.56 and Subnet Mask of

255.0.0.0. After communications have been established, the IP address can be changed

with the help of the command interpreter.

To reconnect the PC to the network, reset the Internet Protocol Properties to Obtain an IP

address automatically.

4-6

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Sin comentarios

Elmomc Multi-Axis Motion Controller-Maestro Installation Manual de usuario Pagina 31